Everything you should know about pool pump and filter system to avoid extra costs in Tennessee

Owning a pool sounds fun and in fact, it is; but on the other hand, things can also get sideways if your pool motor needs replacement. This is why it is always better to know about pool pumps and the filtration process.

This would definitely help you save money and avoid the extra costs in the long run. It might come as a surprise to you, but the pool motors are usually among the largest motors in the home. And for the very same reason, they consume a lot of energy. If you act a little smart, you can save energy consumption with a considerable difference. And by the end of the year, you will not waste thousand-kilowatt hours.

Many people think they cannot keep adequate pool temperature if they save energy, but this is not true, you can do both. And you just need to replace the heavy-duty motor with an efficient but smaller motor. Let us find out more about pool pump motor replacement, pool pump, and filter systems.

Operating the pool pump

The pool motors tend to circulate the pool water which not only keeps the chemicals mixed but also removes the debris. However; a little misconception here is people tend to use their pool motor every day, which is not necessary. If you want to remove debris, you can use a pool pump vacuum.

Most people would circulate the water on a daily basis as they do not want algae to take place in water, which is another misconception. You should try using the water chemicals, and scrub the walls of your pools.

First, start the filtration process with 6 hours per day, and if still your water does not appear clean enough, increase only 30 minutes more each day. According to a study made in Florida, people with only 3 hours per day are happy with the quality of pool water, and also they save up to 60% electricity.

Cost of swimming pool services

On average monthly pool cleaning service might range from $75 to $185. And one-time cleaning can cost you up to $300. Here is a list of maintenance on average.

  • Monthly: $75 to $185
  • One time cleaning up to $300
  • Pool repair price up to $800
  • Pool opening up to $600
  • Pool closing $400
  • Annual maintenance up to $1850

The annual cost can be up to $1850, and one-time cleaning can cost you anywhere between $130 to $300, the pool closing also gets quite important, if your home in Tennessee gets cold climate, you then need to consider closing your pool every winter, which will cost you around $400. The process is also known as winterizing.

Cost by pool size:

Aside from the monthly or per day cost of the pool, it is quite important to know some pool cleaning services charge you by the hour. The hourly rate depends upon the service provider.

But this goes directly proportional to your pool size, meaning if your pool size is larger, it will take pool service to take more hours to clean. And it will add up to your charges. The usual rate for an hour is around $70 to $95, on average it can cost you about $80. Some other pool services aside from cleaning can also charge you hourly, such as; pool pump leaking, pool pump replacement, or pool pump installation process.

Tips to save power consumption

We now know that if your pool is fairly large, it can not only cost you extra on cleaning service, but also you may have to run your motor more frequently, this can add up to your cost. But there are some things you can do to lower the cost and power consumption. Let us shed light on that.

Swimming pool pumps and filters play a vital role in power consumption. Try to use a smaller but efficient motor to reduce your electricity cost. In order to select the best motor for you, contact the pool supplier design chart, so you can match the hydraulic specifications. Also, piping and pool flow needs to match.

You can decrease the hydraulic resistance too if you substitute a large filter. But make sure it is about 40% bigger than the pool design flow. Trying to increase the diameter would also result in decreased hydraulic resistance.

For that, you can also shorten the pipe length. Applying these tricks can help you save about 40% electricity. It is quite advisable to consult a pool expert, as they can give you very useful tips based on their experience.

How long should the pool pump run daily?

Pool pumps should not run all day, you might hear this a lot from people. But this is just misinformation. Pool pumps do not necessarily have to run all day long. By doing so, you are only going to increase your electricity cost.

The length to run pool pumps is defined by the pool size you have. Try to figure out and talk to pool experts. It is advisable to start with 3 hours per day, and only increase 30 minutes each day to notice the effect.

If your pool is fairly large in size, then you may have to run pool pumps 6 hours a day, but that would be sufficient, provided that your installed motor is efficient.

Related Articles:

Why do you need a home warranty for new construction?

How to choose a home warranty company for your roof coverage?

Leave a Reply

Your email address will not be published. Required fields are marked *